RFXCOM - RFXtrx433E Transceiver, USB HA Controller 433.92MHz

RFXCOM - RFXtrx433E Transceiver enables you to control 433MHz-based devices from your computer or from a Z-Wave controller such as the Vera3 or Vera Lite or Fibaro Home Centre (using free software Domoticz). It supports a huge number of 433MHz-based products including our DC1602,DC1702, DC1663 and DC920 etc. RF handheld remote control.

The RFXrtx433E interfaces with a wide range of home automation software, including Domoticz, Homeseer, Indigo, Xtension, and hardware controllers such as the Vera3 and Vera Lite.

RFXtrx433E - Extended capabilities
This is the RFXtrx433E (Extended version) that replaces the previous RFXtrx433. It includes a hardware extension and additional firmware to enable it to support Somfy wireless blinds (RTS). The extedned functionality is already supported in Domoticzt, Homeseer and the VERA RFX plugin.

Main features
•Plug and Play
•Ultra low power usage (0.14 Watt)
•433.92MHz receiver
•Two transmitters: 433.92MHz for commodity products and •433.42MHz for Somfy
•Standard FTDI USB interface
•Supports the largest set of devices
•Supported by all major Home Automation systems
•Easy firmware updates in flash memory
•CSMA-CA technology to avoid RF collisions

Support for Somfy RTS in the Homeseer3 RFXCOM plug-in is already available and has also been added to Domoticz and DomotiGa. It is expected that the VERA RFXtrx plug-in will also be extended with Somfy RTS support in the near future.

Low priced, Receive and transmit functions, Standard USB interface, supports the largest range of sensors and actors, supported by many Home Automation solutions, easy integration in any application, Flash memory for firmware updates, CSMA-CA technology to avoid RF collisions.

RFXTRX433E WILL RECEIVE THESE 433.92 SENSORS:

-Cent-a-Meter,Electrisave,OWL power meters,
-Alecto, Cresta, FineOffset, Hideki, LaCrosse, Oregon, Rubicson, TFA, Viking weer sensors
-Avidsen,Chacon,NEXA,Flamingo,Blyss,Proove smoke detectors,
-Atlantic,Meiantech,Visonic,X10 alarm sensors,
-Oregon body weight scale,
-Maverick,Rubicson BBQ sensors,
-Chacon,HomeEasy,KlikAanKlikUit,NEXA,X10 remotes.

​And can be used to control for example these 433.92MHz devices:

-ANSLUT, BBSB, Blyss, Brennestuhl, Chacon, COCO, DI.O, ELRO, Energenie, Eurodomest, HomeEasy, Impuls, Intertechno, Kambrook, KlikAanKlikUit, LightwaveRF, Livolo, Mercury, NEXA, Phenix, Proove, RisingSun, Sartano, Siemens, X10, XDOM dimmers/switches,
-Byron SX, SelectPlus chime,
-A-OK, BOFU, Ematronic, Hasta, RAEX, Rohrmotor24, Rollertrol, Somfy, Yooda blinds/awning motors,Harrison, Forest curtain motors,
-Kingpin,Media Mount,Proluxx projection screens,
-Avidsen,Chacon,NEXA, Flamingo, Blyss, Prove smoke detectors with siren,
-Mertik Maxitrol fireplace,
-Aoke relays,
-TRC02 RGB, MDREMOTE LED strip controller,
-Smartwares radiator valve.

Importantly, RFXCOM - RFXtrx433E support all of our DC1602, DC1663 and DC920 RF remote control here.

RFXTRX433E IS SUPPORTED BY:

Beyond Measure
BM is an ever growing set of modules, designed to work together with the purpose to bringing the power of flexibility and advanced functions to the user at an affordable price.

Domogik
Domogik is an open source home automation solution based on the xPL standard protocol.

Domoticz
Domoticz is a Home Automation system that lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be send to any mobile device.

DomotiGa
DomotiGa is Open Source Home Automation Software from the Netherlands. It is written in Gambas Basic and runs on Linux.

eedomus
eedomus is a home automation solution consisting of a gateway, applications and an optional cloud service. By adding compatible devices, you design the home automation solution that suits your needs.

Ed-Win
Ed-Win is simply a skin engine. It will allow you to create your own screens and animate them as you want.

EventGhost
EventGhost is an advanced, easy to use and extensible automation tool for MS Windows

FHEM
Fhem is a GPL'd perl server for house automation. It is used to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature / humidity / power consumption.

Homeseer
HomeSeer HS3 is an advanced home automation and remote access software package works with a wide variety of hardware. Once installed, you'll be able to monitor and control your home from any Web browser (locally or remotely) via computer, PDA, PocketPC, or cell phone.

HoMIDoM
HoMIDoM is a complete system management automation technology for multi-home on Microsoft Windows. Homidom is an open source project free available to the community!

Indigo Domotics
Indigo is an intelligent home control server that integrates an assortment of home control hardware modules to provide unprecedented control of your home.

Jeedom
The Jeedom software is open source, you have full access to the software which manages your home automation system. This guarantees transparency but also a long life of the software and of your installation.

Meteohub
Meteohub is a miniaturized weather server, that records weather data from your weather station, evaluates this data, draws user defined weather graphs and uploads these via ftp to a web server.

openHAB
openHab is Java based vendor and technology agnostic open source automation software for your home. Build your smart home in no time!

Open Source Automation
OSA is free and open source. Anyone with an internet connection can download, install and get up and running without spending a dime. Even more exciting is the open extendability of OSA. Anyone can use the open source API included with OSA to develop new plugins and expand the functionality of the system.

PiDome
PiDome is a transparent home automation environment for the raspberry pi for end users as well as for developers and/or hobbyists. For end users we tend to create a controlled environment in such a way that every device, component or plugin is controlled in exact the same way. And for developers/hobbyists to provide a flexible API to program they’re own specific hardware in Java or use a graphical xml editor to create devices and/or plugins.

For RFXCOM USB RFXtrx433E user guide,please click the " link" below and click " more information " .