iSW25TE/S-1.5/32 AC mains powered Bi-directional blinds motor

iSW 25-TE/S- 1.5/32 AC mains powered Bi-directional tubular Motor is better for the roller blinds of new build homes, it has a built-in transfer, all you need is to be connected to a 100~240 V / 50 Hz,60 Hz AC power point or a permanent connection unit. It has a built-in electronic radio receiver and an electric limit function. DC motors are extremely quiet and have an unlimited amount of turns unlike the AC tubular motor.

This iSW25TE/S-1.5/32 motor is Bi-directional motor, it means it can feedback the blind status and you can do the percentage control through the Wi-Fi bridge ( Hub ), and you can buy the cheap DD1554 mini wifi bridge instead of buying more expensive DD7002B wifi Bridge.
It comes with the standard driving wheel adaptor and crown for 45mm OD ( outside diameter ) aluminum blind tube. It's rated torque is 1.5 Nm and rated speed is 32 rpm, therefore for the 45mm tube, its lift capacity with standard adapters is around 6 kg. If you use the 480g/m2 roller blind fabric with the weight of the bottom rail being 1.5 kg, then the maximum size of the roller blind would be 3m(W)X3.0m(H) after deducting the weight of the bottom rail.

Meanwhile we have several different size of drive wheel adaptors and crowns to choose to meet the requirement of 38mm, 43mm, 44mm, 46mm and even 50mm OD blind tubes. As we have done a lot of retrofitting works, our adaptors and crowns can be used to retrofit the roller blinds which were made by many different roller blind manufacturers, they can be used for Acmeda and JAI blind tubes, so for those customer who want to retrofit their existing roller blinds to motorised ones, please just send an enquiry form firstly include a drawing or photos and the accurate measurement of your existing tube and the size of your blind, we might be able to provide you the right and correct size of drive wheel adapter and crown to suit your retrofitting needs .But please note to contact us firstly before you purchase.

For those customer who are going to order new custom made roller blind and tubular motor together through us, we will supply you 45mm aluminum tube for your roller blind whatever how small of your blind, so we will supply you the tubular motor with 45mm drive wheel adaptor and crown respectively.

Please note: since iSW25TE/S is Bi-directional motor, you have to use bi-directional remote to control it, you need to purchase bi-directional remote separately.

Features:

•Built-in Receiver,
•Jog & Tilt,
•Limit Fine Adjustment,
•Radio Lock,
•Status Feedback,
•Switch Direction,
•Stall Protection,
•Program Button,
•Reset to Factory Mode,
•Electrotonic Limit,
•Preferred Stop Position,
•Speed Regulation